aking, now most laptop keyboards would not be over just because water enters once. There’s big hope to save it if to clean up water. If you are still unsure about these steps, you could skip this step and jump to the next one.
The fourth step: if there’s much water entering your machine or the there’s other component except water in the liquid, then next let’s take apart the machine and clean the liquid inside. You need to open the laptop and make sure not to use it 72 hours at least. During this period, it’ll be better if there’s a low-configured cold blower and use it to dry the waterish area inside the laptop.
The fifth step: when you find the laptop is completely dried, then you could try starting your laptop and install the cleaned system battery. If your laptop cannot start up, even after executing the steps above, then you could wait for more days and give it a chance. Let it dry, and then try starting it again. If still fail, then you need further technology support, contact a computer repair company. It’s quite important to take an action quickly.
If your keyboard is quite dirty which needs cleaning, then go buy a good brush of which hair would not drop. Turn off the laptop and let it stand sideways, and then clean up the apertures of the keyboard carefully. Keep the brush dry and off of water! Or you could use a little dust collector to absorb the dust at the connection joint and keyboard apertures.