fusion. However, for the disk with physical damage, suggest changing it, because the physical damage on disk means the life of the disk would not be long.
8. Disk with bad track could not be partitioned
Failure symptom: the disk could not partition, and disk scanner could not pass through.
Failure analysis and solution: it is estimated that the disk has bad track. If bad track is not severe, you can shield it with Partition Magic. If there’re many bad tracks, suggest changing the disk.
9. Repair the damaged disk by malicious code
Failure symptom: unfortunately, when browsing web pages, the computer gets infected by some malicious code. After the computer crashes down, hard disk could not be found again when restart, even repartition, it still doesn’t work.
Failure analysis and solution: it’s estimated that malicious code broke the Firmware of the hard disk or disk partition table. Generally, this kind of problems need another disk to boot, check whether it could be partition or not. If not, check whether you can fresh new disk’s Firmware, if you can fresh, then suggest updating the Firmware of the hard disk. if it still couldn’t be repaired, you’d better to send it to repair.
10. Error occurs when carry out Defragment.
Failure symptom: system prompts error when doing defragment application to the disk.
Failure analysis and solution: actually, the position of file stored on disk is discontinuous, especially after reading the file several times. Then it would waste more time for op