A wireless bridge is a device that is used in connecting LAN segments wirelessly. The wireless bridge can also be called the LAN bridge. This is helpful, especially when two computers that are far apart need to have a connection. Wireless bridges are most commonly used to share the ISP so that the computers can have access to the Internet
. The computer can also send and share data with each other.

Using a wireless bridge to connect computers is not only very efficient; it can also help save your time and money. Here are the steps on how to connect your WiFi bridge:

   1. Configure IP address. The first thing you have to do is to configure the IP address of the router. To do this, click on the ‘Control Panel’ folder on your computer. Choose ‘Network Connections’ and click on ‘Local Area Connection’. Choose ‘Properties’ and look for the properties of the IP address. You must set the IP address to 192.168.1.2. After this, set the Subnet Mask to 255.255.255.0. The last thing you have to do is to set the Default Gateway to 192.168.1.1. Make sure that you have all the correct settings before continuing.
   2. Connecting to router. After configuring the IP address, you can now connect to the wireless router. To do this, open a web browser window. Look for the wireless network settings and choose the option ‘Client Bridge’. You have to choose the right setting for the primary router that you are going to use. You can change this on ‘Wireless Network Mode’ sec