Preparation:
1. Try reading, when get the recovery disc, try it on your laptop or other computers, if it could be read, then you could begin installation, and neglect the article here, but if laptop CD-ROM doesn’t read it, I suggest you burn a new one and install then!
2. Backup: installation needs to format the entire system partition, so I suggest you back up important data before installing, of course during the installation, it would ask you to back up.
 
Notices:
1. Recover all settings back to factory settings, such as BIOS, no need to modify anything, the recovery disc could recognize the interface mode of the hard disk;
2. Recover BIOS to default settings, you could press F1 when start up to enter BIOS Setup, press F9 to recover default settings, F10 to save and exit;
3. If data on hard disk is very inordinate, installation process may get some problems, you may consider deleting all data and partition information manually and then begin the work next.
 
Installation steps:
1. Press f12 when start up, choose to boot from CD-ROM in the list, of course the precondition is that the first boot CD has already been in the CD-ROM, and then press Enter to continue;
2. Continue waiting….
3. Initializing…….
4. Enter the main interface of Win PE, then you’ve come to operable steps, click “Continue”, this is the interface that new models after T61 could see.
5. Click the “Recover completely” button on the top left corner, if you choose the “Start advanced Rescue and